AXYZ International can supply a range of tooling designed specifically for working with composite materials.
For grooving a V tool or ball nose would normally be used and this would be in conjunction with the Axyz floating head system.
This is essential to ensure a constant depth of cut into the material and compensates for any minor variations in the machine bed.
If the cut is too deep there is a risk of the material splitting when it is folded. If the cut is not deep enough it will be difficult to fold accurately.
For more tooling information go to our www.cncroutershop.com
|
|
|
|
|
|
 |
O-Flute Up Spiral Cutter:
Profiling of 3,4 and 6mm material producing superior edge equality.
|
| |
|
| |
 |
|
2-Flute Ball Endmill:
Ball groove to produce the required fold angle and bend radius.
|
|
| |
|
| |
 |
|
V-groove:
V-groove with flat tip to produce the required angle and fold radius.
|
|
| |
|
| |
 |
|
Custom Ball Endmill:
Tooling specially configured for processing exotic material.
|
|
| |
|
| |
 |
|
Pressure Foot:
With the addition of specially designed chip extraction and depth management head the processing of composites is very simple.
|
|
| |
|
